to the channel list. Be sure to insert batteries into the remote control unit before use.
Figure 19: TV buttons and indicators
1. POWER: Turns the TV on or off.
2. CH (channel): Selects the next higher or lower channel.
3. VOL (volume): Increases or decreases the sound level.
4. SOURCE: Selects the input source: Press Source to open the list of input sources, press the
Channel buttons to select the input source, and then press Select.
5. SELECT: Selects the highlighted item in a menu. Starts the Auto Sync function for a connected
PC signal source.
6. MENU: Opens or closes the onscreen display (OSD).
7. Power light: Shows whether the TV is on or off. The light is blue when the TV is plugged in but
turned off; the light is amber while the TV is powering up after you turn it on, and then goes
off after about 30 seconds. The light is off when the TV is not plugged in. The light flashes
amber or blue during diagnostics or when an error occurs.
8. Remote control sensor
Figure 20: Remote control
1. Power button
TV back panel
Figure 21: TV connectors, back