HP LC4776N Manual page 4

3. Turn the assembled stand over and insert four short screws into the bottom of the base, and
tighten the screws to secure the base to the pedestal.
Figure 8: Insert four short screws into the bottom of the base
4. Carefully place the TV panel with the glass screen facing downward on a padded, stable table.
Position the bottom of the TV near the edge of the table.
 WARNING:
Do not lean or press on the TV panel. The stand is heavy. Do not allow the stand to drop onto
the TV panel. Do not lift the stand over the TV panel.
5. Holding the assemble stand by the base with the rear facing up toward you, place the stand into
the bottom of the TV. Hold the stand in place.
Figure 9: Place stand into bottom of the TV
6. Insert four long screws into the holes on the back of the stand (pedestal) and into the rear of the
TV, and then tighten the screws.