Advertisement
Resetting HL SERIES (continue mode)
Your Brother printer will let you know when you are low on toner using an LED lights and or a replace toner
message on your computer. The printer asks for the toner cartridge to be changed before all of the toner
has been used. This is a waste of toner and your money. So put it into continue mode and use up all the
toner.
© Zinetic.co.uk. All Rights Reserved
Please read instructions from start to finish
before you start your refill.
LED showing Toner light on
Computer pop up saying replace toner.
To override :
Press the go button seven times in quick
succession
All LEDs blink twice when you turn on the
Continue Mode.
All LEDs blink once when you turn off the
.
Continue Mode
Additional info for printers: HL-
L2340DW / HL-L2360DN / HL-L2365DW
Press or to select the General Setup
•
option, and then press OK.
Press or to select the Replace Toner
•
option, and then press OK.
Press or to select the Continue or
•
Stop option.
Press Go.
•
Advertisement
