Download Print this page
NavePoint Consumer Series Quick Start Quide

NavePoint Consumer Series Quick Start Quide

Advertisement

Quick Links

Consumer Series
Thank you for purchasing a NavePoint product. NavePoint intends this manual to guide you through
a smooth installation of the product. NavePoint assumes that you are qualified in the servicing of
computer equipment and trained in recognizing any hazards that may occur in the installation of this
product. If you have any questions regarding the installation or use of your product, please call us at
888.505.1363.
Examine the package for any damaged or loose parts. If
anything is damaged or missing, contact NavePoint for
assistance. Do not attempt to install or use cabinet if it has
been damaged.
The information contained in this document is subject to change
without notice.
NavePoint makes no warranty of any kind with regard to this
material, including, but not limited to the implied warranties of
merchantability and fitness for a particular purpose.
NavePoint shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance, or use of this material.
NavePoint assumes no responsibility for the use, application, or
reliability of the software or hardware that you install into the
product. Always install the heaviest equipment in the bottom.
It is highly recommended that installation of this product be
performed by a qualified and experienced installer. Improper
installation of this product could result in damage to the
product, other equipment, or personal injury. NavePoint cannot
be held responsible for damage to equipment or personal
injury resulting from improper use, installation or the misuse of
information presented in this document.
Hardware:
(H-4)
(H-3)
(H-1)
(H-2)
3 locks included for most models
Side Panels
(C)
Front Rack Frame
Front Glass Door
www.NavePoint.com
customerservice@navepoint.com
© 2017 NavePoint, LLC
Rev. 20170517
Important information-
Keep this information for further reference.
WARNING
Different wall materials require different type of an-
choring devices. Use anchoring devices suitable for
the walls which you are using in your application. For
advice on suitable anchoring systems, contact your
local specialist.
Limitations of Liability: In no event will NavePoint, LLC. (or its
officers, directors, employees or agents) be liable for any dam-
ages, whether direct or indirect, special, punitive, incidental or
consequential damages (including, but not limited to, lost profits
or revenue, loss of use, lost business opportunities or loss of
goodwill) or for the costs of procuring substitute products, arising
out of or in connection with the use of the product, whether such
liability arises from any claim based upon contract, warranty, tort
(including negligence), product liability or otherwise, whether
or not seller has been advised of the possibility of such loss or
damage. In no event will seller's total cumulative liability, from
all causes of action and all theories of liability, exceed the total
amounts actually paid to seller by customer under the order that
gives rise to any liability hereunder.
Punch out cover
(G)
Top Cover
(F)
Rack Rail
(I)
(B)
(D)
Back Cover
(A)
Bottom Base
(E)

Advertisement

loading

Summary of Contents for NavePoint Consumer Series

  • Page 1 Thank you for purchasing a NavePoint product. NavePoint intends this manual to guide you through www.NavePoint.com a smooth installation of the product. NavePoint assumes that you are qualified in the servicing of customerservice@navepoint.com computer equipment and trained in recognizing any hazards that may occur in the installation of this ©...
  • Page 2 Insert Front Rack Frame (C) and Back Cover (D) into Bottom Base (A). Secure with M6 Screws (H-1) x 4 and M6 Nuts (H-2) x 4 and M6 Pilot Tip Screws (H-3) x 4. Place Top Cover (B) onto Front Rack Frame (C) and Back Cover (D).