NavePoint Consumer Series Quick Start Quide page 2

3
Install all 4 Rack Rails (H) into place with
M6 Screws (H1) and M6 Nuts (H2) (2 per Rack Rail)
F
H-3
B
H-1 & H-2
A
H-4
I
H-5
G
1
Insert Front Rack Frame (C) and Back Cover (D) into
Bottom Base (A). Secure with M6 Screws (H-1) x 4 and M6
Nuts (H-2) x 4 and M6 Pilot Tip Screws (H-3) x 4.
2
Place Top Cover (B) onto Front Rack Frame (C) and Back
Cover (D). Secure with M6 Screws (H-1) x 4 and M6 Nuts
(H-2) x 4 and M6 Pilot Tip Screws (H-3) x 4.
C
H-1 & H-2
H-3
Detail
E
4
Insert Plastic Door Hinge holders (H-5) into Front
Rack Frame (C) (the thicker hinge holder goes on
the bottom and the thinner hinge holder goes
on top (see photo). Place Glass Front Door (F)
on Front Rack Frame (C) and click hinge pins into
place.
Detail of H-5
5
Insert both Sides Panels (G) into place
6
Add locks to Side Panels (G) and Glass Front Door (F) – use
flat latches for side locks and bent latch for front lock.
7
Secure Punch-out Covers (H) onto Top Cover (B) and Bottom
Base (A) with M4 Screws (H-4)
Detail of H-1 & H-2
Detail
Detail of H-1 & H-2