Epson L120 User Manual page 52

User's Guide
Lights
* In some print cycles a very small amount of surplus ink may be collected in the ink pad. To prevent ink leakage from the pad, the
product is designed to stop printing when the pad has reached its limit. Whether and how often this is required will vary according
to the number of pages you print, the type of material that you print and the number of cleaning cycles that the product performs.
The need for replacement of the pad does not mean that your product has ceased to operate in accordance with its specifications.
The product will advise you when the pad requires replacing and this can only be performed by an authorised Epson Service
provider. The Epson warranty does not cover the cost of this replacement.
Error Indicators
Problem and solution
Recovery mode
The firmware update has failed, and the product
is in recovery mode.
You will need to try to update the firmware
again. Prepare a USB cable and visit your local
Epson website for further instructions.
52