Hardware Symptoms - Agilent Technologies 1200 Series Reference Manual

3
Troubleshooting

Hardware Symptoms

In case of a problem with the vacuum system or the electronic control the
vacuum degasser status lamp will be red. The vacuum degasser will generate
an error output on the remote lines. This will shut down other system modules
when connected via remote cable, see
page 17. The vacuum degasser itself will not be able to generate any error
messages in the system logbook of the Agilent 1200 Series.
The following pages describe hardware symptoms which help you to isolate
the cause of a hardware failure.
36
"Installing the Vacuum Degasser"
1200 Series VD Reference Manual
on