1
Installing the Vacuum Degasser
Transporting the Vacuum Degasser
Drain any remaining solvents from the degassing channels before transporting the
WA R N I N G
vacuum degasser.
1 Disconnect the solvent tubes from solvent inlets from front panel.
2 Disconnect one of the solvent tubes from your pump.
3 Connect syringe adapter to solvent tube of this solvent channel.
4 Push syringe adapter onto syringe.
5 Pull syringe plunger to draw solvent out of vacuum degasser and tubing.
6 Repeat
22
Continue to draw solvent into syringe until the solvent channel is
completely empty.
step 2
through
step 5
for the remaining solvent channels.
1200 Series VD Reference Manual