cmotion cPRO User Manual page 114

Pre-marked iris strips:
*K2.0019836
*K2.0019838
*K2.0019837
* is not comatible with cPRO ONE hand unit
Camera interface cables:
K2.0015754
Connects cmotion cPRO motor and camin to RS connector.
Provides power, camera RUN/STOP and tally function on cPRO hand unit. Works with ARRI
ALEXA / AMIRA and SONY VENICE cameras.
K2.0015755
Connects cPRO motor and camin to the EXT connector of an ARRI ALEXA EV camera.
Provides camera RUN/STOP function, tally and camera status information on cPRO hand
unit.
K2.0015756
Connects cPRO motor and camin to ARRI AMIRA / ALEXA MINI / ALEXA MINI LF EXT
connector.
Provides camera RUN/STOP function, tally, camera status information and remote camera
control* on cPRO hand unit.
* ARRI camera control license required
C0XE-K07
Connects cPRO motor and camin to ARRI ALEXA PLUS / ALEXA LF cameras.
Provides power to LBUS daisy chain, RUN/STOP function, tally, camera status information
and camera control* on cPRO hand unit.
* ARRI camera control license required
K2.0015757
Connects cPRO motor and camin to LANC connector (e.g. Canon C300 / C500) and D-Tap
power source.
Provides camera RUN/STOP function and tally on cPRO hand unit.
All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
pre-marked iris strip T 22-2.8 for cPRO hand unit
pre-marked iris strip T 22-2.0 for cPRO hand unit
pre-marked iris strip close- T 1.0 for cPRO hand unit
Cable CAM (7p) - RS
Cable CAM (7p) - EXT (16p)
Cable CAM (7p) - EXT (6p)
Cable CAM (7p) - LCS (5p)
Cable CAM (7p) - LANC/D-Tap
page 114 of 120