Factory Reset - cmotion cPRO User Manual

6.2.3.9.5.
The factory reset menu allows you to reset the cPRO / cPRO PLUS or cPRO ONE hand
unit and all connected LBUS devices to manufacturer settings.
Please select all if you want to reset all connected LBUS devices together with the cPRO
/ cPRO PLUS / cPRO ONE hand unit. Select cPRO / cPRO PLUS / cPRO ONE hand unit
if you want to reset the cPRO / cPRO PLUS / cPRO ONE hand unit only. Select LBUS
devices and then one device from the dynamic LBUS device list if you want to reset a
specific LBUS device only.
Please confirm your selection by pressing reset. Press back / cancel to cancel the reset
procedure.
When performing a factory reset on the cPRO / cPRO PLUS or cPRO ONE hand unit, you
will be asked to confirm whether you also want to reset the internal lens database. If you
do want to delete ALL lens files saved on the cPRO / cPRO PLUS or cPRO ONE hand
unit, press "yes". Press "no" to perform a factory reset without deleting the entire lens
database.
Do not power off the cPRO / cPRO PLUS / cPRO ONE hand unit or the connected LBUS
devices while the factory reset is in progress as this may damage the device!
All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu

Factory reset

NOTICE
page 103 of 120