Advertisement
STEP 10:
Attach Drawer Handle (U x 1pc)
to the Front Drawer Panel
(J x 1pc) using Bolts / Washers /
Nuts (V x 4pc)
*Note: Tighten all Nuts/Bolts at
this time.
STEP 11:
Lay Wood Drawer Bottom
(T x 1pc) down on a flat surface.
Attach Right (L-R x 1pc) and
Left (L-L x 1pc) Drawer Panels to
the Front (J x 1pc) and
Back (K x 1pc).
Repeat Steps 10 & 11
for second drawer.
STEP 12:
Install the two drawers into the
workbench.
*Note: When sliding in, make sure
the runners on the drawer are level
with the drawer mounts.
Visit our website at:
http://www.calaindustries.com
ASSEMBLY INSTRUCTIONS
7
Figure G
Figure H
(Step 12)
CALA Industries, INC. Copyright
2015 All Rights Reserved Item #C14724WB
©
Advertisement
