Advertisement
STEP 3:
Attach Bottom Beams (E x 2pc) to
Front and Back Posts.
STEP 4:
Attach Side Beams (D x 2pc).
NOTE: Top two holes on Front
Post.
NOTE: Middle two holes on
Back Post.
STEP 5:
Attach Top Beams (E x 2pc)
NOTE: Top two holes on
Front Post.
NOTE: Middle two holes on
Back Post.
*Note: Warning label on side beam.
Visit our website at:
http://www.calaindustries.com
ASSEMBLY INSTRUCTIONS
5
Figure B
Figure C
Figure D
CALA Industries, INC. Copyright
©
WARNING
TO PREVENT SERIOUS INJURY:
1. Setup and use indoors only. Keep your work bench dry.
2. Do not exceed 514 lb. maximum load capacity, evenly distributed. Be aware of
dynamic loading! Sudden load movement may briefly create excess load causing
product failure.
3. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
4. Do not overtighten workpiece; damage to workpiece may occur. Be careful not to
MAXIMUM WEIGHT CAPACITY
pinch fingers when working.
514 lb. evenly distributed as follows:
5. Locate work bench on a flat, level, solid surface that is capable of supporting the
Bench Top
220 lb
weight of the workpiece, workbench and tools.
Bottom Shelf
200 lb
6. Do not allow children to play with or near work bench.
Each Drawer
25 lb
7. Do not remove this label.
Top Shelf
44 lb
ITEM# C14724WB
2015 All Rights Reserved Item #C14724WB
Advertisement
