Advertisement
Quick Links
OWNER'S MANUAL & SAFETY INSTRUCTIONS
SAVE THIS MANUAL Keep this manual for the safety warnings, assembly, inspection,
maintenance and cleaning procedures.
During unpacking, and before assembly check to make
sure the parts are undamaged. If anything is missing or
broken, please contact Cala Industries, Inc. at:
619-448-2252 or email: info@calaindustries.com
Visit our website at:
ITEM# C14724WB
http://www.calaindustries.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
CALA Industries, INC. Copyright
2015 All Rights Reserved Item #C14724WB
©
Advertisement
Summary of Contents for Cala C14724WB
- Page 1 ITEM# C14724WB During unpacking, and before assembly check to make sure the parts are undamaged. If anything is missing or broken, please contact Cala Industries, Inc. at: Read this material before using this product. 619-448-2252 or email: info@calaindustries.com Failure to do so can result in serious injury.
-
Page 2: Table Of Contents
Max weight capacity only applies to completely assembled product. Do not exceed weight capacity per each section. 10. Inspect before every use, do not use if any parts are loose or damaged. Visit our website at: http://www.calaindustries.com CALA Industries, INC. Copyright 2015 All Rights Reserved Item #C14724WB ©... -
Page 3: Parts List
Bench Top - 220 lb. Bottom Shelf - 200 lb. Each Drawer - 25 lb. Top Shelf - 44 lb. 220 lb. 25 lb. Each 200 lb. Visit our website at: http://www.calaindustries.com CALA Industries, INC. Copyright 2015 All Rights Reserved Item #C14724WB ©... -
Page 4: Assembly
Front Post are shorter with 4 holes on top. STEP 2: Attach Rubber Feet (C x 4pc) to bottom of each post. Figure A Visit our website at: http://www.calaindustries.com CALA Industries, INC. Copyright 2015 All Rights Reserved Item #C14724WB ©... - Page 5 Each Drawer 25 lb 7. Do not remove this label. Top Shelf 44 lb ITEM# C14724WB *Note: Warning label on side beam. Figure D Visit our website at: http://www.calaindustries.com CALA Industries, INC. Copyright 2015 All Rights Reserved Item #C14724WB ©...
- Page 6 Back Posts. Figure F (Steps 7 & 8) STEP 9: Tighten all Nuts/Bolts at this time. *Make sure workbench is on a flat surface. Visit our website at: http://www.calaindustries.com CALA Industries, INC. Copyright 2015 All Rights Reserved Item #C14724WB ©...
- Page 7 Install the two drawers into the workbench. *Note: When sliding in, make sure the runners on the drawer are level with the drawer mounts. (Step 12) Visit our website at: http://www.calaindustries.com CALA Industries, INC. Copyright 2015 All Rights Reserved Item #C14724WB ©...
- Page 8 (Steps 13 - 16) STEP 17: Attach Pegboard (R x 1pc) to Upper Posts & Middle Drawer Mount Using Bolts/Washers/Nuts (X x 8pc) Figure J Visit our website at: http://www.calaindustries.com CALA Industries, INC. Copyright 2015 All Rights Reserved Item #C14724WB ©...
- Page 9 Shelf (P x 1pc) on Bottom Beams Figure K STEP 19: Attach Wood Top Shelf (S x 1pc) to Shelf Beams using Bolts/Washers/Nuts (Y x 4pc) Figure L Visit our website at: http://www.calaindustries.com CALA Industries, INC. Copyright 2015 All Rights Reserved Item #C14724WB ©...
-
Page 10: Maintenance
The Cala Industries 90-day warranty is warranted to be free from defects in materials and workmanship for 90 days after the date of purchase by the original owner of the product. If this product is defective, please call Cala Industries at (619) 448-2252.