Table of Contents
Advertisement
3. LUBRICATION
(1) Please make sure to turn power switch off before lubricating.
(2) Please pay attention that oil does not get on your skin or in your eyes as it may cause an inflammation.
(3) Please make sure to keep oil out of the reach of children who may drink oil by mistake.
[Notice] Please make sure to lubricate when operating for the first time after the installation. Also, please
make sure to check the amount of oil when the machine has not been used for a long time.
3-1. Filling the oil tank
Pour the oil through the oil hole (No.1 and 3) to the oil tank (No.2 and 4) on the machine arm. Pour
the oil hole (No.5) to the oil tank (No.6) on the machine bed. Please fill with the oil over level mark
(No.7) of the oil tank.
3-2. Oiling
Put some oil to the red marked oil holes (No.8 ~ 13).
<11>
<10>
<8> <9>
<13>
<7>
4. Initial setting of the control box
When using the sewing machine for the first time, the model and the language of the sewing machine in
use have to be set.
Refer to the instructions in the paragraph "[6] Initial Setting of System (Model/language Setting)" in the
CONTROL UNIT technical manual.
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com
CAUTION
<3>
<12>
<5>
<6>
<1>
<4>
- 5 -
<2>
Advertisement
Table of Contents
