Plymovent CONTROLPRO Instructions
  1. Manuals
  2. Brands
  3. Plymovent Manuals
  4. Control Panel
  5. CONTROLPRO
  6. Instructions

Plymovent CONTROLPRO Instructions

Update firmware
Hide thumbs Also See for CONTROLPRO:
1
2
3
4

Advertisement

Table of Contents

INSTRUCTIONS TO UPDATE CONTROLPRO/HMI FIRMWARE

BEFORE YOU START, CHECK THE FIRMWARE
VERSION OF YOUR CONTROLPRO/PANEL
1.
Turn ControlPro power on.
2.
The "HOMESCREEN" will appear on your
ControlPro/HMI display
3.
Press the [ i ] button to open the "operational
information" screen.
4.
Scroll down to "System info – ControlPro/Panel" to find
the current "firmware version".
Note: If it shows the latest version, there is no need to update your ControlPro/Panel

UPDATE HISTORY

■ For the update history, please check www.plymovent.com

WHAT YOU NEED TO UPDATE YOUR CONTROLPRO/PANEL

■ ControlPro/Panel with ControlPro/HMI connected.
■ A USB-memory device (USB2.0 or 3.0), formatted in a FAT32 file system.
■ A computer with a USB connector.
■ These instructions
CAUTION WHEN PERFORMING THE UPDATE
Never apply this update data to any product other than the ControlPro/Panel.
This update data may destroy the data or system program of other products.
■ We recommend that you create a backup of all settings (settings screen "5.5 Backup" before performing the firmware update.
■ Imported language files could be deleted during the update. After updating the firmware, the language file can be imported again.
■ NEVER POWER-OFF YOUR CONTROLPRO WHILE THE UPDATE IS IN PROGRESS!
■ If a power failure or similar accident occurs during the update process, it is possible that the ControlPro won't be able to start
up in normal operating mode. This will require servicing, so you will need to contact your Plymovent distributer if this occurs.
■ Please perform the update responsibly, following the directions given in this document.
www.plymovent.com
(1/4)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CONTROLPRO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Plymovent CONTROLPRO

Summary of Contents for Plymovent CONTROLPRO

  • Page 1 ■ NEVER POWER-OFF YOUR CONTROLPRO WHILE THE UPDATE IS IN PROGRESS! ■ If a power failure or similar accident occurs during the update process, it is possible that the ControlPro won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact your Plymovent distributer if this occurs.
  • Page 2 PROCEDURE FOR THE UPDATE * Never power-off your ControlPro while the update is in progress. If a power failure or similar accident occurs during the update process, it is possible that the ControlPro won’t be able to start up in normal operating mode.
  • Page 3 (3/4) UPDATE THE FIRMWARE ■ The following screen appears on the ControlPro/HMI display: ■ Press the [ Update ] button. The following warning message appears: www.plymovent.com...
  • Page 4 ■ Check if the new firmware version is implemented successfully in the “operational information” screen, via the [ i ] button on the homepage. * After you performed the update, you must delete the update files from the USB-memory device for the normal usage. www.plymovent.com...

Table of Contents