W+W 78334 Mounting Instruction page 5

3) + 4)
5. Mount the four angles with their longer side at the threaded rods. Use the washers
and nuts for this.
6. Lay the ladder on the ground, so that the shorter sides of the four angles are laying
completely on the ground.
7. Fix the angles firmly to the ladder.
The ladder must stand vertically and firmly on the ground with both
ladder beams.
If necessary the bottom must be adjusted.
Check carefully that the ladder does not extend into the moving parts
of the lift.
8. Mark the holes for the angles at the wall and drill them with a 2" drill into the wall.
9: Fix the ladder to the wall.
All dowels and screws must be positioned tightly in the wall.
The provided dowels shall only be used for concrete walls.
0. Secure the ends of the threaded rods with the plastic cap nuts.
5)
© W W 09/205 Version 0
+
ID32768
5