Advertisement
®
Control4
KNX
For Control4
versions of the application program from ETS v.5.6.6 (or higher).
•
Import the current VD file into ETS and add a product to the project, using the current application
program.
•
After you have parameterized a device, you can transfer the settings to a second device. For this
purpose, the devices must already be available in the ETS project.
•
Right click on the product and select Conversion in the context menu for this purpose.
•
Then follow the instructions in the dialog window.
•
Finally, you must replace the physical address and delete the old device.
®
KNX devices, it is possible to adopt the parameter settings and group addresses from earlier
Advertisement
