Assembly-Accessories - hergom L-08 CCE Installation, Use And Maintenance Instructions

II.- ASSEMBLY-ACCESSORIES
ASSEMBLING THE HAND RAIL
The supports will come with the bolt
in and only have to tightened to the
base.
Left support:
clockwise. When it reaches the limit
it will be horizontal, with the round
part facing out. Hold the support in
place and tighten the screw on the
corner section (fig 1 and 2).
Right support: introduce, turn
clockwise and when ½ turn is left
introduce, turn
before reaching the limit, place
obliquely with the round part facing
down and out (fig 2 and 3).
Handrail: introduce in the left
support and place on the right
support (figure 3). Turn the right
hand support
introduce the handrail, then place it
horizontally
support and tighten the screw on
the corner.
21
clockwise
(fig. 4). Hold
and
the