Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sorotec Hobby Line MPF.HL1.4530
Summary of Contents for Sorotec Hobby Line MPF.HL1.4530
- Page 1 Hobby Line Operation manual MPF.HL1.4530 MPF.HL1.6045 MPF.HL1.7545 MPF.HL1.10560 SOROTEC GmbH Tel.: +49 (0) 7227-994255-0 Withig 12 Fax: +49 (0) 7227-994255-9 Version 1.2.0 77836 Rheinmünster E-Mail: sorotec@sorotec.de Web: www.sorotec.de...
-
Page 2: Table Of Contents
6.2 Software ..............11 www.sorotec.de Page 2/16 V 1.2.0... - Page 3 9.2 Recycling and upcycling ........... . . 16 www.sorotec.de Page 3/16 V 1.2.0...
-
Page 4: Preliminary Remarks
Observe the safety instructions! Attention! Before starting up the CNC machine, it is essential that you read the safety instructions in Chapter 3 of this manual. Always keep the manual close at hand near the machine. www.sorotec.de Page 4/16 V 1.2.0... -
Page 5: Imprint
E-Mail: sorotec@sorotec.de Web: www.sorotec.de © 2021 Sorotec GmbH Reprinting, duplication or translation, even in extracts, is not permitted without the written consent of Sorotec GmbH. Sorotec GmbH expressly reserves all rights under copyright law. Technical changes reserved. Made in Germany. -
Page 6: 1� Introduction
6 mm in wood. 2�3 Disclaimer of liability Sorotec is not liable for personal injury or property damage caused by any use other than the intended, improper handling or disregard of the safety regulations. www.sorotec.de Page 6/16 V 1.2.0... -
Page 7: 3� Safety Instructions
Several switches, for example also for the door of an enclosure, can be connected in series in the emergency stop circuit. 3�4 Explosion protection It is forbidden to operate the machine in an potentially explosive environment. www.sorotec.de Page 7/16 V 1.2.0... -
Page 8: 4� Technical Data
Hobby Line Operation manual 4� Technical Data 4�1 Main dimensions Länge Breite Length Width 450 600 750 1050 300 Alle I 691 1291 J 631 1231 K 453 1053 www.sorotec.de Page 8/16 V 1.2.0... -
Page 9: Machine Parameters
Hobby Line Operation manual 4�2 Machine parameters www.sorotec.de Page 9/16 V 1.2.0... -
Page 10: 5� Installation And Connection
(mechanics, tools, controls and software) and be familiar with the dangers. Attention! The machine must not be operated after taking substances that impair perception and reaction (alcohol, drugs, medication with a corresponding warning notice, ...). www.sorotec.de Page 10/16 V 1.2.0... -
Page 11: Software
The core of the operation is the software used to operate the control. For details, please refer to the manuals of the respective manufacturer. The choice of software has a major impact on the hardware required for control. Sorotec recommends Beami- con2 Basic or Estlcam for the machines in the Hobby Line and offers sensibly put together complete packages as accessories. -
Page 12: 7� Maintenance
• Lubricate the spindle nut of the X-axis with a grease gun, as shown in Figure 1. • Remove excess fat with a rag. • Build the Z-axis parts back into place. Fig. 1: Lubricating the X-axis www.sorotec.de Page 12/16 V 1.2.0... - Page 13 • Lubricate the spindle nuts of the Y-axis as shown in pictures 2 and 3. • Close and screw on the covers. Fig. 2: Lubricating the Y-axis on the left Fig. 3: Lubricating the Y-axis on the right www.sorotec.de Page 13/16 V 1.2.0...
- Page 14 Fig. 4: Lubricating the Z-axis Note: As a grease gun, we recommend the “Mini grease gun” set from the Sorotec online shop (item no. SM.00018). The machine kit also includes a thinner pipe with a slimmer nozzle. These parts fit every commercially available grease gun.
-
Page 15: 8� Troubleshooting
8�2 Unintentional standstill Machine does not Broken connection Check connection start to control Erroneously pres- sed emergency Check emergency stop stop switch Blocked door Check door switch switch Software error www.sorotec.de Page 15/16 V 1.2.0... -
Page 16: 9� Dismantling And Disposal
The continued use of components that are still functioning, such as stepper motors or the control in another machine, is definitely worth considering. Sorotec sees progressive environmental protection in this and will be happy to advise you on the specific options.
Need help?
Do you have a question about the Hobby Line MPF.HL1.4530 and is the answer not in the manual?
Questions and answers