Maintenance / Cleaning; Cleaning The Filter Plate - Xylem YSI FM/PC Mounting Instructions

Maintenance / cleaning

8
4 Further proceeding as described in the operating manual of your
analyzer (chapter C
Bild 4-2 Filtration unit (filter module mounted on the guide slide)
5 Maintenance / cleaning
5.1

Cleaning the filter plate

When to clean the filter plate can be determined empirically based on
the negative pressure display on the filtration pump.
 With a delivery height of approx. 2 m and a new filter plate, the neg-
ative pressure is approx. -0.3 bar.
Every meter of delivery height increases the negative pressure by
FM/PC, FM-Case/PC, Filter/PC
).
OMMISSIONING
ba76171e02 04/2019