Table of Contents
Advertisement
Contents
Introduction
Thank you for purchasing your timber windows from
JELD-WEN.
JELD-WEN timber windows are designed and manufactured
in Britain and are fully weather stripped to achieve BS 6375
Pt1. Glazing is supplied with toughened safety glass to
BSEN12150 where appropriate.
IMPORTANT:
Installation of these Windows should be carried out by a
minimum of two people.
Prior to installing the product please ensure you have
carefully inspected each package. In the unlikely event you
discover any damage or defect do not proceed to fit until
you have notified JELD-WEN (0845 122 2893 option 3)
This window and all its components should be stored in a
dry flat location prior to and during installation.
JELD-WEN factory glazed windows and external doorsets have been CE marked as directed under European
law on 1 July 2013.
Building Regulations
Please consult with your building designer to ensure
compliance with current building regulations such as
Approved Documents B, E, F, K, L, N & Q.
2
JWW3203_18708_Stormsure Energy+_Fit_instruct_A5.indd 2
JWW3203_18708_Stormsure Energy+_Fit_instruct_A5.indd 2
02
03
03
03
04
04
04
The windows are made from engineered finger jointed
timber which is preservative treated for long life (See biocide
regulations information contained within this document)
Before commencing installation read through these
instructions very carefully ensuring the Product has reached
you in a satisfactory condition.
Replacing windows is notifiable work and MUST either
be carried out by a FENSA or other registered installer,
or with prior Building Control approval.
Registered FENSA companies can be found at
www.fensa.co.uk
05
06
08
08
09
11
09/02/2021 11:52
09/02/2021 11:52
Advertisement
Table of Contents
