Storing And Scrapping; Machine Identification Data - Ravaglioli RAVTD4400 Manual

RAVAGLIOLI S.p.A.

8 STORING AND SCRAPPING

Storing - In case of storing for long periods, disconnect all power supply sources and
protect those parts, like the printer and monitor, that might be damaged by excessive
dust deposits.
Grease the parts that might be damaged by dryness.
Scrapping – In the event of the machine being no longer used, this must be made
inoperative:
Any parts that could be dangerous must be made harmless.
Divide parts up according to their disposal class.
Scrap as scrap iron through authorised disposal channels.
If considered as special wastes, dismantle and split into uniform parts before disposal
through authorised channels.
9

MACHINE IDENTIFICATION DATA

CAUTION: Do not tamper with, carve, change or remove the identification plate; do not
cover it with panels, etc., since it must always be visible.
Said plate must always be kept clean.
WARNING: Should the plate be accidentally damaged (removed from the machine
damaged or even partially illegible) inform immediately the manufacturer.
RAVAGLIOLI S.p.A. – 40044 Pontecchio Marconi (BO) Via I Maggio, 3
A
B
Tel. (+39) 051/ 67.81.511 – Fax (+39) 051/ 84.64.67
e-mail: rav@ravaglioli.com
RAV TD4400
C
A) Manufacturer
B) Model
C) Weight
D) Serial number
E) Year of manufacturer
/http www.ravaglioli.com
OPERATOR'S MANUAL
Code M0150 - rev.1.0
(01/2008)
D
E
Page 15/ 15