Table of Contents
Advertisement
Using Bluetooth
To enter the Bluetooth mode, press the
press the MODE button to cycle through to Bluetooth.
• If no Bluetooth device is connected, Bluetooth
pairing will begin automatically and the
• The radio will continue to search for a signal for
3 minutes.
• To manually pair a device, press and hold bluetooth
button until the
• While the
RADIO" on the Bluetooth capable device.
• Once the device has successfully paired with the
radio, the
will be shown on the radio's display.
Connecting
To enter the Bluetooth mode, press the
press the MODE button to cycle through to Bluetooth.
When the radio locates a paired Bluetooth device,
the
If connection is lost between the radio and the Blue-
tooth device, the radio will try to reconnect automati-
cally for up to 3 minutes.
Controlling
When streaming music through to the radio via a
Bluetooth device, use the
pause the music. Use the ◄ and ► to move through
the tracks.
CHARGER OPERATION
Charge only MILWAUKEE® M18™
WARNING
Lithium-Ion battery packs in the
MILWAUKEE® Li-Ion Battery Charger. Other types
of batteries may cause personal injury and dam-
age. Battery pack and charger are not compatible
with V™-technology or NiCd systems.
When to Charge MILWAUKEE® Li-Ion
Battery Packs
Remove the battery pack from the tool for charging
when convenient for you and your job. MILWAUKEE®
batteries do not develop a "memory" when charged
after only a partial discharge. It is not necessary to run
down the battery pack before placing it on the charger.
• Use the Fuel Gauge to determine when to charge
your MILWAUKEE® Li-Ion battery pack.
•
starting a big job or long day of use.
How to Charge the Battery Pack
Plug the Radio + Charger into a 230-240V outlet. The
battery packs will not charge if the Radio + Charger
is not plugged in. Place the battery pack onto the bay
by sliding the pack on from the top of the bay. The
or cold) or continuous (pack is charging).
• A fully discharged battery pack with an internal tem-
perature in the normal range will charge in about 30
to 185 minutes, depending on the capacity of the
battery pack.
• Heavily cycled batteries may take longer to charge
completely.
• The Fuel Gauge lights on the battery pack are
displayed as the pack is being charged, indicating
how fully charged the pack is.
Pairing
.
button to start and
• After charging is complete, the continuous green
button, or
• The charger will keep the battery pack fully charged
if it is left on the charger.
•
that the battery pack is fully seated into the bay. Re-
icon will
move the pack and reinsert. If the problem persists,
contact a MILWAUKEE® service facility.
• If the light indicator does not come on, check that
the battery pack is fully seated into the bay. Remove
the pack and reinsert. If the light indicator still does
not come on, contact a MILWAUKEE® service facility.
Charging a Hot or Cold Battery Pack
The Red Flashing Indicator light on the charger in-
dicates that the battery pack temperature is outside
the charging range. Once the battery pack is within
the acceptable range, normal charging will take place
button, or
and the red light will be continuous. Hot or cold bat-
teries may take longer to charge.
Battery Pack
Temperature
Too Hot
Normal Range
Too Cold
WARNING
battery pack from the charger or tool before
performing any maintenance. Never disassemble
the tool, battery pack or charger. Contact a
MILWAUKEE® service facility for ALL repairs.
Store your charger in a cool, dry place.
As a general practice, it is best to unplug battery
chargers and remove battery packs when not in use.
No battery pack damage will occur, however, if the
charger and battery pack are left plugged in.
Changing Back-up Batteries
WARNING
The following care should be taken to prevent
such an incident:
•Make sure the positive (+) and negative (-) bat-
tery terminals are positioned correctly.
•Do not mix new and old batteries together, or
If chemicals from the batteries come in contact
water. If chemicals leak onto the radio, clean the
radio completely.
Choking hazard. Keep batteries away from
children.
To hold station presets and clock time when the bat-
tery pack is removed and the radio is unplugged, (2)
AAA batteries are required.
1. Remove battery pack and unplug radio.
2. Remove the screw and battery cover.
3. Insert two (2) AAA batteries according to
matching positive (+) and negative (-) marks.
4. Replace the battery cover and screw.
5. Always dispose of used batteries properly.
6
Li-Ion Charging Status
Red Charger
Indicator Light
Fast Flashing
Continuous
Fast Flashing
MAINTENANCE
To reduce the risk of injury, always
unplug the charger and remove the
Maintenance and Storage
Batteries may leak chemicals or
m
a
y
e
x
p
o l
d
e
f i
Charging Status
Not charging
Normal charging
Not charging
u
s
e
d
n i
c
r o
e r
t c
. y l
Advertisement
Table of Contents
