Mounting The Barrier Bar; Mounting And Removing The Deflector - Stihl FSA 135 R Instruction Manual

English
1
2
6
7
► Fit the clamp (4) in the loop handle (3).
► Place the loop handle (3) with clamp (4) on the shaft (5).
► Fit the washers (2) on the screws (1).
► Press the clamp (6) against the shaft (5).
► Insert the screws (1) through holes in the loop handle (3)
and clamps (4 and 6).
► Fit and tighten down the nuts (7) firmly.
7.2

Mounting the Barrier Bar

► Switch off the brushcutter and remove the battery.
1
► Insert the nuts (2) in the barrier bar (1) so that the holes
line up.
► Fit the clamp (5) in the loop handle (3).
► Place the loop handle (3) with clamp (5) and barrier bar (4)
on the shaft (6).
► Press the clamp (7) against the shaft (6).
16
3
4
5
3 4
2
5
6
7
8
► Insert screws (8) and tighten.
7.3

Mounting and Removing the Deflector

7.3.1 Mounting the guard
► Switch off the brushcutter and remove the battery.
2
► Push the deflector (1) into the guides on the gear housing
up to the limit stop.
► Insert the screws (2) and tighten them firmly.
7.3.2 Removing the Deflector
► Switch off the brushcutter and remove the battery.
2
► Unscrew the screws (2).
► Pull off the deflector (1).
7 Assembling the Trimmer
1
1
0458-662-0121-A