TENA SmartCare Change Indicator Instructions For Use Manual
Hide thumbs
Also See for SmartCare Change Indicator:
- Instructions for use manual (108 pages) ,
- Quick manual (100 pages) ,
- Instructions for use manual (105 pages)
Related Manuals for TENA SmartCare Change Indicator
Summary of Contents for TENA SmartCare Change Indicator
- Page 1 TENA SmartCare Change Indicator ™ Family caregivers Instructions for use www.tena.com 110786-5MA002-15 IFU TENA SmartCare Change Indicator Family caregivers Version: 2020-01-28...
-
Page 2: Table Of Contents
The TENA SmartCare Change Indicator system tracks urine saturation but does not detect faecal episodes. Use Change Indicator The TENA SmartCare Change Indicator is attached to the outside of Remove Change Indicator the incontinence product and tracks the urine saturation levels within. -
Page 3: Important Information
Be aware of the risk of strangulation with the sensor strip. • S eekimmediatemedicalcareifthebatteryisswallowed. • D onotattempttorepairormodifytheChangeIndicatororgateway by yourself. • I fanypartoftheChangeIndicatorsystemappearstobedamaged or broken, it should not be used. Contact TENA for support. • D onotexposethebatteryathightemperatures,disassembleit, damageitmechanicallyorputbatteryintothefireasthiscancause anexplosionorafire. • D onotusegatewaysandhandhelddevicechargerswithunapproved power supplies. -
Page 4: Tena Smartcare Change Indicator Components
TENA SmartCare Change Indicator components Download app and set up account SENSOR STRIP, x2 DOWNLOAD TENA Length: S, M or L SMARTCARE FAMILY APP GATEWAY Download the TENA SmartCare Family app from App Store or Google Play and then register your account. -
Page 5: Explanation Of App During Use
10 m – no action needed (33 ft) of the user FCC I The absorbent core of the TENA product is dry and connected to an and the surface feels dry to the skin. electrical power outlet. -
Page 6: Register Transmitter Code
000 000 000 000 000 See page 24 Transmitter lights & buttons WARNING Only CR2032 batteries shall be used in the TENA SmartCare Change Indicator. F indthetransmittercode,which E nterthetransmittercode is located on the back of the in the TENA SmartCare Family IPXX transmitter or on the packaging. -
Page 7: Attach Change Indicator
Attach Change Indicator Use Change Indicator See supported products on pages 16–20 of this guide or in the TENA SmartCare Family app. Press both buttons simultaneously for two seconds at every change. This records the change of incontinence product in the TENA SmartCare Family app and resets the system. -
Page 8: Remove Change Indicator
Remove Change Indicator Intended use Intended Use: The TENA SmartCare Change Indicator is an accessory to absorbent incontinenceproducts,intendedforuseonindividual(s)suffering IPXX from urinary incontinence in a home or professional environment who FCC ID: are dependent on one or more caregivers to change the absorbent NOTE incontinence products. -
Page 9: Attachment Instructions For Supported Tena Products
Plus, Super or Maxi Plus, Super or Maxi The TENA SmartCare Change Indicator should always be attached when the The TENA SmartCare Change Indicator should always be attached when the incontinence product is folded and before it has been applied to the user. -
Page 10: Tena Stretch Brief
Super or Ultra Plus or Super The TENA SmartCare Change Indicator should always be attached when the The TENA SmartCare Change Indicator should always be attached when the incontinence product is folded and before it has been applied to the user. -
Page 11: Tena Brief
Super or Ultra The sensor strip is designed to withstand approximately 4 weeks continuous use. The TENA SmartCare Change Indicator should always be attached when the Sometimes, however, the hooks on the back of the sensor strip can become covered with incontinence product is folded and before it has been applied to the user. -
Page 12: Cleaning
Clean the Change Indicator when fully assembled to prevent for more information. water entering the device. Do not clean in the washing machine. Do not submerge in water. IPXX FCC ID: UDI: TENA SmartCare Change Indicator TENA SmartCare Change Indicator... -
Page 13: Transmitter Lights & Buttons
Applying the Change Indicator to the incontinence product Press both buttons simultaneously for two seconds at every change of incontinence product. This records the change of incontinence product in the TENA SmartCare Family app and resets the system. LED LIGHT... -
Page 14: Troubleshooting
Press both buttons simultaneously. If there is a steady light for a few seconds, 4. If this does not help, please contact TENA everything is OK. SmartCare support. 4. If there is a blinking light, check that the 5. - Page 15 2. Try moving the gateway to a place where differentnotifications: it is within range of the transmitter. 1. Dry – two empty drops: The absorbent core of the TENA product is dry and the surface Connection Network Occasionally, the cellular network may go feels dry to the skin.
- Page 16 (see p. 12 of this guide). 3. Make sure the Change Indicator is attached correctly (see p. 12 of this guide). 4. If this does not help, please contact TENA SmartCare Support. 4. If this does not help, please contact TENA SmartCare Support.
- Page 17 Indicator stays securely attached to the incontinence product. 3. For more thorough cleaning, use an ethanol-based sanitizer for disinfection. 4. Use the free end of the sensor strip to remove lint from the Velcro. TENA SmartCare Change Indicator TENA SmartCare Change Indicator...
-
Page 18: Operating Characteristics
Remote communication At least 10 metres (33 feet) in open environment, range without obstructions Battery module TYPE CAPACITY / VOLTAGE CR2032 220 mAh/3.0 V nominal This value is with recommended battery: CR2032 TENA SmartCare Change Indicator TENA SmartCare Change Indicator... -
Page 19: Electromagnetic Compability (Emc)
Storage & transport temp. +10 °C +40 °C Storage & transport humidity 65% Rh 85% Rh Operating temp. +15 °C +45 °C Operating humidity 15% Rh 90% Rh (non-condensing) Pressure 700 hPa 1060 hPa TENA SmartCare Change Indicator TENA SmartCare Change Indicator... -
Page 20: Disposable Parts
FCC ID: Disposable parts Labeling symbols UDI: • C leantheChangeIndicatorbeforedisposal. The following symbols may appear on your TENA SmartCare Change Indicator, accessories and/or packaging: • F ollowlocalregulationsfordisposaloftheChangeIndicator,thegatewayand the batteries. IP54 • T hisdeclarationrelatesexclusivelytotheradioequipmentinthestateinwhichit IPXX Manufacturing date IPClassification was sold and excludes components that are added and/or operations carried out subsequentlybythefinaluser. - Page 21 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Essity Hygiene and Health AB Essity Hygiene and Health AB SE-405 03 Göteborg, Sweden...
Need help?
Do you have a question about the SmartCare Change Indicator and is the answer not in the manual?
Questions and answers