Installing Usb Driver - Archos MiniCDRW 2 Quick Start Manual

2. Installing USB Driver

Driver installation is required when installing MiniCDRW 2 for the
first time
Windows 98 SE:
Turn on your computer and wait until it has finished booting.
Connect USB end of USB cable to a free USB port on your computer
Note – Do not use USB ports repeated on some peripherals (such as
keyboards).
MiniCDRW 2 would not be able to draw enough power from such
ports.
A "New Hardware Found" window will guide you through installation
of driver. When prompted for driver disk, insert USB Install Disk in
floppy drive, or use ARCHOS CD disk to install drivers from your
internal CD drive.
Windows ME - Windows 2000 & Windows XP:
Turn on your computer and wait until it has finished booting.
Connect USB end of USB cable to a free USB port on your computer
Note – Do not use USB ports repeated on some peripherals (such as
keyboards) MiniCDRW 2 would not be able to draw enough power
from such ports.
A "New Hardware Found" window will guide you through installation
of driver. Microsoft "USB Mass storage" drivers will be automatically
installed. No install disk is needed.
- 6 -