Opening The Lid Of Minicdrw 2 Drive; Closing The Lid Of Minicdrw 2 Drive; Installing Nero Burning Rom Software - Archos MiniCDRW 2 Quick Start Manual

3. Opening the Lid of MiniCDRW 2 Drive

NOTE: The cover of MiniCDRW 2 drive DOES NOT eject or
open automatically like a tray CDROM .
Press firmly
Lock/Unlock button.
Wait until
spinning.
Cover will unlock.
Grasp "TABS" on both sides of the
lid and gently lift up.

4. Closing the Lid of MiniCDRW 2 Drive

With the lid open, insert the CD disk with printed label facing up.
Push down gently on the cover. It will lock automatically.
MiniCDRW 2 is now ready for use.

5. Installing NERO Burning ROM Software

NOTE: MiniCDRW2 drive will not operate if the cover is
NOT in the locked position after inserting a CDROM
media.
Insert ARCHOS CDRW CD disk into the drive
Close cover and wait for the CD disk to spin up.
Select Install NERO V5.5 Burning ROM from main menu, and click
OK.
Choose NERO. Installation will start automatically.
If you wish to use the CD-RW writer as a floppy drive, install InCD Packet
Writing by repeating the instructions above and choose InCD/Packet
Writing .
on the
the CD disk
silver
stops
- 7 -