The List Of Available Networks; Advanced Connection - Archos 5 160GB User Manual

5
|
• When the WiFi is enabled, the ARCHOS will
connect automatically to your configured
networks when they are in range.
• If the ARCHOS finds a network that has
never been configured, it will display a no-
tification icon
the interface. Drag the top bar downwards
to reveal the notification message and tap
on it to view available WiFi networks.

The lIsT Of aVaIlable neTwOrks

• The list of available networks shows all the wireless networks in range of your
device.
• The list is constantly refreshed automatically.
• Tap on the network you want to connect to, enter the required network informa-
tion* and then tap on "
connection to that WiFi hot spot with the network parameters you entered.
* For free access WiFi points, there is no need to enter any special informa-
tion. For secured networks, you will need either a key (a series of numbers
and/or letters) of the type WEP, WPA, or WPA2, or you will need to have a WiFi
access point that uses the WiFi protection standard WPS (WiFi Protected
Setup). Check with the person who manages the WiFi network to obtain the
exact connection parameters required.

adVanCed COnneCTIOn

• To manually scan for available WiFi networks, on the "
on the Menu icon
• If the WiFi network you want to connect to does not appear in the list, scroll
down the screen, then tap on "
Save
then tap on "
• To access the advanced network parameters ("
etc), tap on the Menu icon
appear: the required information can be obtained from the person who manages
the network.
MANUAL V2.0
in the top left corner of
Connect
". Your ARCHOS will now attempt to establish a
, then tap on "
Add a Wi-Fi network
".
, then tap on "
Scan
".
". Enter the required settings,
Regulatory domain
Advanced
MAKING A wIfI CoNNECTIoN > P. 14
Wi-Fi settings
" screen, tap
IP address
", "
". Other parameters will
",