Apricorn EZ-BUS-DTS 1TB User Manual page 18

8. Enter the image name in the File Name text box, located near the
bottom of the window. You can enter any name you wish. It might
be a good idea to use the date, such as Jan2505 for January 25
2005. Click Next to continue.
9. The Compression Level window will open. In this window, you can
optimize the creation of the image fi le to suit your needs. Lower
compression level increases the speed the image fi le is created.
Higher compression levels create smaller image fi les. The estimated
size and time will be located in the description section of the window.
Choose a compression level and click Next to continue.
10. The Image Archive Splitting window will open. Select Automatic
and then click Next to continue.
11. The Image Archive Protection window will open. If you do not
want to password protect your image, Click Next to continue. If
you enter a password, please remember the password for
future use. If you forget the password, you will be unable to
access the image fi le at a later date. Apricorn does not have
the ability to retrieve the password. Click Next to continue.
12. This will open the Image Archive Comments window. You can use
this window to write comments about the image (such as the imaging
date, computer, operating system, etc.). Click Next to continue.
13. This will open the Apricorn Image EZ Archive File Creation Script
window. Verify the operations listed in the white box. If there are
corrections to be made, click the Back button to change selected
options. The selected operations will not execute until the Proceed
button is clicked. If everything is correct, you can click the Proceed
button to create the image fi le.
14. Image EZ completes the selected options, the Congratulations
screen will appear.
15. BACKUP COMPLETE!!! The EZ Bus now contains a complete image
of the selected drive or partition(s).
15 The Leader in Personal Storage