Table of Contents
Advertisement
5.
Open the folder for your operating system.
6.
Click on fi le CY_BG to install the drivers. Follow the install wizard
to install the drivers. You will be asked to restart your computer.
7.
After you reboot your computer, plug in the EZ Bus USB cable into
the open USB port.
8.
After the "new hardware found" message, a sweries of windows
will show that Windows is installing the EZ Bus. Of the drive is clicking
and the new hardward wizard does not appear, plug the power cable from
an open USB port into the power port on the EZ Bus. When windows in
fi nished installing the EZ Bus, you will have access to the drive.
www.apricorn.com
8
Advertisement
Table of Contents
