Do not allow water to collect and freeze in fountain bowl(s) or shell. Do not allow fountain pieces to sit in a pool of ice. Disassemble entire
fountain and pump and store indoors during the winter season.
If you cannot store your fountain indoors during the winter season, you must at least protect it from ice collection or exposure. "How To" protect your fountain during the winter season:
first remove the statue(s) and pump, storing them inside if possible. Next, locate the drain plug on the underside of bowl(s) or shell. Remove drain plug to drain any water "trapped"
between the walls of the bowl(s) or shell. Then fill the bowl(s) or shell with an absorbent material such as burlap, blankets, etc. Finally, cover the entire fountain with a Henri Fountain
Cover. Should condensation droplets form on the inside of the cover, they will be absorbed by the material.
By following these simple and sensible precautions during the winter season, you will protect your fountain for years of beauty and enjoyment!
Page 2
Assembly Instructions 5887F4 Large Rock Falls Fountain Caution: Several of the pieces of this fountain are large and very heavy, be certain you have sufficient assistance to safely lift and place them before you begin assembly! 1. Locate a suitable site for your Rock Falls Fountain. Site should be level and provide a pleasing viewing angle.
Need help?
Do you have a question about the Large Rock Falls Fountain and is the answer not in the manual?
Questions and answers