3.3. Presence event output
When event control is turned on, the presence detection result would be shown at Event tab page.
Item
Presence Event
Distance (m)
Time (s)
Received event command would be shown in the command textbox for reference.
Description
Presence detection result.
- IN: moving object detected in the zone
- OUT: no moving object detected in the zone
Detected distance range of the closest moving object, in meter.
Relative event time, in second. This is the time starting from ower
on, not an absolute time.
©
Copyright
JORJIN TECHNOLOGIES INC. 2020
http://www.jorjin.com.tw
CONFIDENTIAL
Doc No: MM5D91E00-UG-D03
Page 12