NRS Healthcare Stanton Raised Toilet Seat Series User Instructions

M11120 - 2" (50mm) Stanton Raised Toilet Seat with Lid
M11132 - 4" (100mm) Stanton Raised Toilet Seat with Lid
N05266 - 6" (150mm) Stanton Raised Toilet Seat
N05289 - 6" (150mm) Stanton Raised Toilet Seat with Lid
Maximum
User
Weight:
General Safety Warning
Please ensure these instructions are fully read and
understood before installation/ use. Retain these
instructions in a safe place for future reference.
1.0 Intended Use
The Stanton Raised Toilet Seat is designed to fit
a standard toilet bowl and provide a secure
raised toilet seat surface for those with reduced
mobility.
2.0 Safety Precautions
 Do not exceed the maximum user weight
limit of 30st (190kg)
 Inspect the Toilet Seat regularly to ensure it
is fitted correctly, is safe and secure, and fit
for use. If in any doubt, contact a competent
installer of sanitary equipment.
 Inspect at regular intervals for wear and
damage.
 Any undue signs of damage should be noted
and reported to the supplier in the first
instance. Should damage be evident, then
the user should refrain from using the
product until advice has been sought from
the supplier.
3.0 Unpacking
Check all parts carefully before assembling the
product. Do not assemble if any of the parts are
damaged. Do not assemble if any of the
contents are missing.
Contents
Raised Toilet Seat
2 Part Side Brackets (x2)
User Instructions
Stanton Raised Toilet Seat Range
30st
190kg
4.0 Fitting Instructions
4.1 Bracket Assembly
1. Assemble the side brackets; clip the screw
(with knob) into "L" shaped bracket as shown in
fig 1.
Fig 1
"L" Bracket
2. Slot the bracket into threaded slots in
underside of seat as shown in fig 2 and screw
until the thread is fully engaged.
Fig 2
Screw