Table Of Contents - Task Force Tips G-Force Instructions For Safe Operation And Maintenance
Nozzle fixed, selectable, automatic and automatic with flow limiting
Hide thumbs
Also See for G-Force:
- Manual (36 pages) ,
- Instructions for safe operation and maintenance (16 pages) ,
- Instruction for operation and maintenance (28 pages)
Table of Contents
Advertisement
1.0 MEANING OF SAFETY SIGNAL WORDS
A safety related message is identifi ed by a safety alert symbol and a signal word to indicate the level of risk involved with a
particular hazard. Per ANSI standard Z535.6-2006, the defi nitions of the four signal words are as follows:
DANGER
WARNING
CAUTION
NOTICE
©Copyright Task Force Tips, Inc. 2011-2013
Table Of Contents
1.0 MEANING OF SAFETY SIGNAL WORDS
5.1 FLOW CONTROL
5.1.1
5.2 PATTERN AND FLUSH CONTROL
5.2.1
5.2.2
5.2.3
5.2.4
FLASH OVER POSITION ADJUSTMENT
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious
injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injury.
NOTICE is used to address practices not related to personal injury.
2
LIG-012 April 9, 2013 Rev02
Advertisement
Table of Contents
Need help?
Do you have a question about the G-Force and is the answer not in the manual?
Questions and answers