Electrical Connections - Autoadapt Turny Installation Manual

Electrical connections

J1 Supply
J2 Max rotated in
J1
J3 Max rotated out
J4 Rotation motor (Orbit)
J5 Safety switch
J6 Ignition
J9 Manual control
J12 Lifting motor
J13 Rear limit position
J14 Lift potentiometer
The control card's
messages
Mount the holder for the control in a
suitable location such as the dashboard
or the B-pillar.
Option 1 - provided
+15, 12 V when the ignition is activated
30 A
One of option 1 or 2 must be installed.
!
Connect the two wires together if the
safety switch is not used.
Getting seated Turny
Option 2 - not provided
Door safety switch
article no. 420049
13
EN