Electrolux EHD90230P User Manual page 7

THE HEAT SETTING
Touch the control bar at the heat setting.
The heat setting indicators come on.
THE AUTOMATIC HEAT UP
The Automatic heat up function sets the
highest heat setting for some time, and
then decreases to the necessary level.
Touch . The indicator flashes. Set the
heat setting (1-8). The indicator of the heat
setting comes on. The indicator above
comes on and after some time goes out.
The time of the automatic heat up changes
for different heat settings.
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3
SWITCHING THE POWER FUNCTION
ON AND OFF
The Power function makes more power
available to the induction cooking zones.
The Power function is activated for 10 mi-
nutes at most. After that the induction
cooking zone automatically switches back
4 5 6 7 8
to the highest heat setting (9). To switch on,
touch , the indicator above comes on.
To switch off, touch a heat setting (1-9).
POWER MANAGEMENT
The power management divides the power
between two cooking zones in a pair (see
the figure). The power function increases
the power to the maximum level for one
cooking zone in the pair and automatically
decreases in the second cooking zone to a
lower power level. The display for the re-
duced zone alternates.
USING THE TIMER
Count Down Timer
Use the Count Down Timer to set how long
the cooking zone operates for one cooking
session.
Set the Count Down Timer after the se-
lection of the cooking zone.
You can set the heat setting before or after
you set the timer.
• Selection of the cooking zone:touch
again and again until the indicator of a
necessary cooking zone comes on.
• Starting the Count Down Timer: touch
of the timer to set the time (
minutes). When the indicator of the cook-
ing zone flashes slower, the time counts
9
down.
• Checking the remaining time: select
the cooking zone with
of the cooking zone flashes faster. Dis-
play shows the remaining time.
• Changing the Count Down Timer:se-
lect the cooking zone with
.
electrolux 7
00 99
-
. The indicator
touch or