Installation Instructions - Electrolux EHD90230P User Manual

Hide thumbs Also See for EHD90230P:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
• Do not let cookware boil dry to prevent
the damage to cookware and glass ce-
ramics.
• Do not use the cooking zones with empty
cookware or without cookware.
• Do not cover the parts of the appliance
with aluminium foil.
• Do not cover the ventilation space of 5
mm between the worktop and front of
the unit below it.

INSTALLATION INSTRUCTIONS

Before the installation, note down
the serial number (Ser. Nr.) from the
rating plate.The rating plate of the
appliance is on its lower casing.
EHD90230P
220-240 V 50-60 Hz
58 GCD E2 AU
ELECTROLUX
SAFETY INSTRUCTIONS
Warning! You must read these!
Make sure that the appliance is not
damaged because of transportation.
Do not connect a damaged appliance.
If it is necessary, speak to the supplier.
Only an authorised service technician
can install, connect or repair this appli-
ance. Use only original spare parts.
Only use built-in appliances after you
assemble the appliance into correct
built-in units and work surfaces that
align to the standards.
Do not change the specifications or
modify this product. Risk of injury and
damage to the appliance.
Fully obey the laws, ordinances, direc-
tives and standards in force in the
country where you use the appliance
(safety regulations, recycling regula-
tions, electrical safety rules etc.)!
Keep the minimum distances to other
appliances and units!
Install anti-shock protection, for exam-
ple install the drawers only with a pro-
tective floor directly below the appli-
ance!
Protect the cut surfaces of the worktop
against moisture with a correct sealant!
5 mm ventilation space is essential, failure
to include this during installation can cause
appliance malfunctions which are not cov-
ered under warranty.
949 594 167 01
Induction 6,9 kW
6,9 kW
• The electrical mains terminal is live.
• Make electrical mains terminal free of
voltage.
• Install correctly to give anti-shock protec-
tion.
• Loose and incorrect plug and socket
connections can make the terminal be-
come too hot.
• A qualified electrician must install the
clamping connections correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type
H05BB-F Tmax 90°C (or higher) for a sin-
gle-phase or two-phase connection.
• Replace the damaged mains cable with a
special cable (type H05BB-F Tmax 90°C;
or higher). Speak your local Service Force
Centre.
The appliance must have the electrical in-
stallation which lets you disconnect the ap-
pliance from the mains at all poles with a
contact opening width of minimum 3 mm.
You must have correct isolation devices:
line protecting cut-outs, fuses (screw type
fuses removed from the holder), earth leak-
age trips and contactors.
Caution!
Warning! If there is a crack on the
surface, disconnect power supply
to prevent the electric shock.
Seal the appliance to the work top with
no space left with a correct sealant!
Protect the bottom of the appliance
from steam and moisture, e.g. from a
dishwasher or oven!
Do not install the appliance adjacent to
doors and below windows! If not, hot
cookware can be hit off the hob when
you open doors or windows.
Warning! Risk of injury from electrical
current. Carefully obey the instructions
for electrical connections.
electrolux 3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents