Source Some Bees - Flow Hive Instruction Manual

solution for situating your hive. The Flow Hive 2 has an in-built slope created
by front footblocks on the base or with the inclusion of the optional leg kit.
Check the inbuilt side and rear spirit levels to ensure the correct slope has
been achieved.
• If you have purchased a Flow Super or Flow Frames, you can create the
optimal slope for harvesting by:
1. Chocking up the hive when its time to harvest. Bees can be agitated by
tilting so wear a beekeeping suit, have a smoker on hand and do this
several hours before you harvest.
2. Leaving the hive on a permanent slope. If sloping the hive backwards it is
important to ensure water can't enter the front of the hive.
11

SOURCE SOME BEES

Bees rarely find their way into empty beehive boxes, even though they are
designed to be a perfect home for them. There are a number of ways of
starting a colony. A small nuc (nucleus) hive can be bought from beekeeping
suppliers in most countries. Contact your local amateur beekeepers' club
or your local or state beekeepers' association for further advice on the best
option for you.
l
! WARNING: Before adding bees to your hive, make sure you wear a
protective suit and gloves. Also make sure bees can't escape anywhere
except the hive entrance. Ensure there are no gaps greater than 3mm.
19