Prodipe ST-1 MK2 Lanen User Manual page 4

Thank you for purchasing this appliance. To ensure perfect operation and security, please read the manual
carefully and retain it for future reference. This manual can be downloaded from our site.
PROFESSIONNAL STATIC CONDENSER MICROPHONE
Specifications:
•
Cardioids polar pattern can reduce the
feedback as less as possible.
•
The clear tone quality.
•
Very high precision capsule in lateral
position.
•
Gold-plated diaphragm.
•
High quality SMD component electronic
circuit.
•
Stable and reliable design in a rigid body.
Technical specifications:
•
Type : Condenser.
•
Element: Pressure Gradient
•
Polarity: cardioid.
•
Capsule: Ø 34mm.
•
Frequency Response: 20Hz-20kHz.
•
Sensitivity: - 37±2dB (0dB=1v/pa at 1KHz).
•
Output Impedance: 100Ω ±30% (at 1KHz).
•
Load impedance: ≥1000Ω.
•
Self Noise: 15dB A (IEC 581-5).
•
Max Input SPL: 130dB (≤1% T.H.D. at 1kHz).
•
S/N Ratio: 79dB.
•
Low Frequency
100Hz.
•
Sensitivity attenuation: 10dB (±2dB).
•
Power Supply: 48V DC Phantom.
•
Net Weight: 480g (mic only).
Connecting and disconnecting the microphone cable:
1/ Insert the XLR connector into the microphone. If necessary, rotate the connector to align the key on the
connector and the groove in the microphone. Push the connector into the microphone until clicks. Only
then switch on the phantom power.
2/ To disconnect the cable and microphone, grasp the connector while depressing the tab. Pull the
connector away from the microphone. Phantom power must be turned off when connecting and
disconnecting the microphone.
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2020 IPE Music/Prodipe
Transducer.
Attenuation: 10dB/oct at
Page 4