Power Supply - URBANGLIDE RIDE 69L Translation Of The Original Instructions

a) On / Off
To light the scooter: press the button
To turn off the scooter: press the button for a few seconds
b) Speed change
Press the button once
P0: to use the scooter without the electric mode.
P1: speed 1
P2: speed 2
P3: speed 3
c) Lighting
Press the button once
When braking, the rear light will remain constant.
d) Adjustment
To access the setting mode of your scooter press a few seconds, simultaneously on the buttons
and .
C1: metric system change. You can choose between "KM / H" and "MP / H". To change the metric
system, press the button
To access the next setting, press the button
C2: change the start-up mode. You have two start modes: start with pulse and start without pulse.
To change the start mode, press the button
mode is activated. To start your scooter you have to give a kick with your foot.
To access the next setting, press the button
C3: speed regulator. To activate cruise control mode, press the button
the mode will be activated. When you reach a constant speed, cruise control mode will be activated
automatically. To disable it, you just have to brake.

Power Supply

The charger supplied with the product is specific to the product. Using another charger may damage
the product or cause accidents.
Do not touch substances leaking from the battery. Do not let animals and children touch the battery.
Batteries contain dangerous substances, do not open the battery, do not insert anything into the
battery.
If the storage temperature is below 0 ° C, do not charge the product. You can place it in a temperate
environment (over 10 ° C) for charging. Do not leave the product charged unattended. Do not let the
product charge more than 5 hours.
Warning! Air transport of your product may be regulated or prohibited because of the lithium battery.
on the right handle for a few seconds.
, on the left handle once to move to the next gear.
to turn on the lights. The front light will turn on; the back light will blink.
.
.
.
. When the "start mode" light is on, the "pulse start"
.
5
. When you use the scooter,
EN