Programming The Individual Portions; Display Of The Quantity Counter (Cnt=Counter) - Profitec ProT64 User Manual

5.3 Programming the individual portions

Programming the grinding times takes place via the display.
The time for a single shot (one portion) is programmed in menu item Pt1.
The time for a double shot (two portions) is programmed in menu item Pt2.
Single Shot
Press + and
appears on the display.
Press + in order to reach the submenu
of P .
Here you can adjust the grind time to a tenth
of a second by quickly pressing + or -.
After a short while, the timer will automatically
end programming once adjustment has
The stand-by display appears again.
Double Shot
Press + and
appears on the display.
Press - in order to reach Pt2 .
Press + in order to reach the submenu
of Pt2 .
Here you can adjust the grind time to a tenth
of a second by quickly pressing + or -.
After a short while, the timer will automatically
end programming once adjustment has
finished. T
The stand-by display appears again.

5.4 Display of the quantity counter (Cnt=Counter)

The quantity counter will indicate the entire amount of ground portions to you. Please note that a double
shot will count as two single shots.
Press + and
displayed.
Translation of the original German user manual
Pt1
Pt1
ENGLISH
s
18