Adjusting The Grind; Grinding & Programming; Fixating The Porta Filter And Adjusting The Height - Profitec ProT64 User Manual

Important: Never fill the bean hopper with already ground coffee. Never place a finger or
other items into the coffee bean shute, or the ground coffee discharge funnel.
Emergency Stop Operation:
The grinder may be stopped immediately by activating the On/Off switch on the back side of
the grinder.

4.2 Adjusting the grind

1 Turn the machine on. The bean hopper is filled with coffee beans. Open the lock slide by pulling it
outward.
2 Perform a trial grind by activating the grinding button.
3 In case the grind is
a. too coarse, turn the grind level adjuster clockwise (numbers on the scale are getting
smaller).
b. too fine, turn the grind level adjuster counter-clockwise (numbers on the scale are getting
larger).
4 Please use only small steps when adjusting the grind; only ½ turn of the adjuster.
Grind becomes
finer.
5. GRINDING & PROGRAMMING

5.1 Fixating the porta filter and adjusting the height

During grinding, the porta filter can be comfortably
rested on the porta filter bracket. The bracket can
be adjusted for varying porta filter heights by
loosening both Allen screws with an Allen key
(2.5mm).
Translation of the original German user manual
Grind becomes
coarser.
ENGLISH
16