Advertisement
Maintenance
1. Before each use check all nuts and bolts for tightness.
2. Lubricate wheels as needed.
3. If rust appears on the shield or spring tines, sand lightly and coat with enamel paint.
4. Always store in a dry area, and coat exposed metal with light oil when not in use.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
3. If the scarifier appears to be "jumping" during
use, then extra weight should be added to the tine
shield. In most conditions extra weight will be
needed. Concrete patio blocks are recommended
for weight because of their low profile; however
any type of weight is suitable if it can be tied
down to the shield. Secure weight by using suit-
able binding material such as rubber tie down
straps or wire, fastening to the holes in the shield
flange.
Item 51705
Page 9
01
2021-1
Advertisement
