Advertisement
Locate the hopper cap on your cartridge.
Remove the hopper cap using needle nose pliers, or
a flat blade screwdriver to lever out the hopper cap
5 WARNING: You must ensure all toner is
dumped from your cartridge before refilling with
the new toner.
Important - mixing new and old toner will cause
print defects to occur.
If you used the reset procedure before refilling
there will not be much toner to dump.
Shake your bottle of
new toner vigorously
for 30 seconds
BEFORE removing
the cap.
Remove the cap and
seal from the bottle
Wrap any type of tape around the base of the spout
& neck of the bottle to prevent any fine toner
powder escaping.
www.zinetic.co.uk
Toner that doesn't cost the earth
Printed on recycled paper, using refilled cartridges
Empty in an area
that can tolerate a
toner spill i.e. your
garage.
Toner can be very
messy - empty the
old toner directly
into a large bin bag.
Fit the toner
pouring spout
securely to the
bottle.
Screw it down as
tight as it will go.
email:
sales@zinetic.co.uk
Advertisement
