TechniSat TECHNIPOLAR 2 S Instruction Manual page 46

9.3 Activating special functions with the remote control
9.3.1 Ventilation outlet
The upper ventilation outlet opens and closes slightly in a constant rhythm. If you
want to lock the air outlet in one position, press the Air Outlet button on the remote
control.
Press the button again to automatically adjust the panning.
9.3.2 Changing the temperature unit
Press the Temperature units button to switch the temperature units shown on the
display between degrees Celsius and Fahrenheit.
9.3.3 Night mode
In night mode, the display and the LED on the top of the unit are dimmed.
> Select cool mode.
> Press the Night mode button on your remote control.
The displays are now dimmed and the fan runs at the slowest speed.
In cool mode, the temperature setting is gradually increased to 1°C above
the original target temperature for each of the first 2 hours. The unit then
maintains the same temperature for 6 hours and then switches to standby
mode.
Night mode is not available in fan or dehumidifier modes.
46