TechniSat TECHNIPOLAR 2 S Instruction Manual page 42

7.4 Dehumidifier mode
The unit is ideal for reducing the room humidity (in spring and autumn, damp
rooms, rainy periods, etc.).
Note that in dehumidifier mode the moisture in the air is reduced. The
condensed water is discharged to the outside via the upper drain (10). Direct
the water into a suitable container and empty it regularly, depending on the
size of the container.
> Remove the upper drain cap (1.).
> Connect the supplied hose or a suitable hose to the connection (2.) and
direct it into a suitable container.
1.
> Press the MODE button (1) repeatedly until Dry (8) lights up and, at the same
time, the symbol for the automatic fan Auto (15) lights up.
In this mode, the fan speed is selected automatically by the unit and cannot
be set manually.
Be careful not to kink the condensate hose.
7.5 Fan mode
If you use the unit in this mode, the exhaust hose does not need to be connected.
> Press the MODE button (1) several times until Fan (9) lights up. Press the FAN
button (5) several times to select the desired fan speed - High, Medium, or
Low can be selected.
Automatic control is not available in this mode.
42
2.
Cap
Connect the
hose