TechniSat TECHNIPOLAR 2 S Instruction Manual page 37

6 Installation instructions
6.1 Exhaust air discharge
In cooling mode, the unit must be placed near a window or opening so that the
warm exhaust air can be directed outside.
Place the unit on a level floor, ensure that there is a minimum distance of 45 cm
around the unit, and that it is close to an earthed socket.
1. Extend the hose to the desired length by unravelling it (Fig. 1)
2. Screw it onto the hose inlet (Fig. 2).
3. Screw the hose outlet onto the other end
of the hose (Fig. 3).
4. Mount the hose inlet onto the exhaust air
connection (7) (Fig. 4).
5. Attach the hose outlet to the window kit
(see „6.2 Installing the window kit").
Lock
Attach
DE
EN
PL
NL
37