Preparation Before Operation - Apex Digital AD-800A User Manual

Preparation Before Operation

CONNECTIONS
Before preparing this unit for operation, make sure all equipments are turned off.
The unit has several types of output modes like A/V output, S-VIDEO output, component video
output, progressive scan video output, VGA output, digital signal output (COAXIAL, OPTICAL). You
may select as needed.
CONNECTED TO A TV
1. If the TV is equipped with component or progressive scan input terminals, connecting to the terminals
allows you to enjoy high quality picture playback.
2. You have to set the unit according to the TV to be connected.
• If the system of the TV is PAL, push SYSTEM and select PAL.
• If the system of the TV is NTSC, push SYSTEM and select NTSC. (NTSC is American standard.)
• If the system of the TV is AUTO (multi-system), push SYSTEM and select AUTO.
• Connect the unit to a wide-screen TV. Set the "TV DISPLAY" to "16:9 WIDE" in the function
setting column.
• Connect the unit to an ordinary TV. Set the "TV DISPLAY" to "4:3/PS" or "4:3/LB" in the function
setting column.
10
A P E X D I
COMPONENT VIDEO
AUDIO OUT
SUB
WOOFER CENTER
DIGITAL AUDIO OUT
Y
COAXIAL OPTICAL
Cb
SURROUND
Cr
FRONT/MIXED
G I T A L
OUT
VIDEO OUT
VIDEO
Y
Pb
Pr
VGA
S-VIDEO
To Y Video Input
To Cb Video Input
To Cr Video Input