Preparation Before Operation - Apex Digital AD-703 User Manual

Preparation Before Operation

CONNECTIONS
Before preparing this unit for operation, make sure all equipments are turned off.
The unit has several types of output modes like A/V output, S-VIDEO output, digital signal output
(COAXIAL). You may select as needed.
CONNECTED TO A TV
1. If the TV has S-VIDEO input, please connect the unit and the TV with S-VIDEO cord (not supplied).
You do not have to connect it to VIDEO. S-VIDEO will ensure clearer image.
2. You have to set the unit according to the TV to be connected.
• If the system of the TV is PAL, push SYSTEM and select PAL.
• If the system of the TV is NTSC, push SYSTEM and select NTSC. (NTSC is American standard.)
• If the system of the TV is AUTO (multi-system), push SYSTEM and select AUTO.
• Connect the unit to a wide-screen TV. Set the "TV DISPLAY" to "16:9 WIDE" in the function
setting column.
• Connect the unit to an ordinary TV. Set the "TV DISPLAY" to "4:3/PS" or "4:3/LB" in the function
setting column.
12
A P E X D I G I T A L
Be sure your TV is on the Video Input
channel before you press Setup to select
your settings.
You will see the Setup menu on your TV
screen.
AD-703