Table of Contents
Advertisement
Hose Connector:
This is where the optional hose will connect. In
order for the hose to work properly you need to
shut off the ratcheting top valve (covered above).
Shut off the ratcheting valve, open the tank valve
and crack the return valve when using the optional
hose.
Pond Fill system:
This optional feature allows you to fill the tank
using a pond, river, creek, etc. to operate this
attachment you will need to shut off the sprayers,
using the ratcheting valve, and open the pond fill
valve shown in the picture. Close the tank valve,
and you will open the return valve fully. Make sure
the pump has been primed and either remove the
top fill lid or open it slightly to allow water to fill the
tank. You will also need to secure the fill head into
a small bucket to help prevent sucking up debris
into the hose and tank.
© 2018 Copyright ABI Attachments, INC
7
Advertisement
Table of Contents
